page . 1 september 30,2016-rev.04 mbr540 series schottky barrier rectifiers maximum ratings and electrical characteristics ratings at 25c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. notes : 1. measured at ambient temperature at a distance of 9.5mm from the case 2. minimum pad area 3. pulse test : 300 s pulse width, 1% duty cycle 4.short duration pulse test used to minimize self-heating effect. voltage 40 to 200 volt 5 ampere current features ? epitaxial construction ? guard ring die construction for transient protection ? low power loss, high efficiency ? high surge capability ? high current capability and low forward voltage drop ? surge overload rating to 150a peak ? for use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ? lead free in compliance with eu rohs 2011/65/eu directive mechanical data ? case: do-201ad molded plastic ? terminals: axial leads, solderable per mil-std-750,method 2026 ? polarity: color band denotes cathode ? weight: 0.0402 ounces, 1.142 grams 1 2 cathode anode parameter symbol mbr540 mbr545 mbr550 mbr560 mbr580 mbr590 mbr5100 mbr5150 mbr5200 units maximum recurrent peak reverse voltage v rrm 40 45 50 60 80 90 100 150 200 v maximum rms voltage v rms 28 31.5 35 42 56 63 70 105 140 v maximum dc blocking voltage v dc 40 45 50 60 80 90 100 150 200 v average rectified output current (see figure 1) i f(av) 5a non-repetitive peak forward surge current : 8.3ms single half sine-wave superimposed on rated load i fsm 150 a power dissipation p d 2.5 w forward voltage at 5a (notes 3) v f 0.7 0.74 0.8 0.9 v maximum dc reverse current at rated dc blocking voltage (notes 4) t j =25 o c i r 0.05 ma t j =100 o c10 - ma t j =125 o c - 51ma typical thermal resistance (notes 2) (notes 1) (notes 1) r ja r jl r jc 50 15 12 o c / w typical junction capacitance (v r =4v,f=1mhz) c j 250 150 pf operating junction and storage temperature range t j ,t stg -55 to +150 -65 to +150 o c 1.0(25.4)min. 0.052(1.3) 0.048(1.2) 0.375(9.5) 0.285(7.2) 1.0(25.4)min. 0.210(5.3) 0.188(4.8)
page . 2 september 30,2016-rev.04 mbr540 series t ypical characteristic curves fig.1 forward current derating curve fig. 2 m aximum n on - r epetitive s urge c urrent fig. 3 typical reverse characteristics fig. 4 typical reverse characteristics fig. 5 typical reverse characterist ics fig. 6 typical forward characteristics
page . 3 september 30,2016-rev.04 mbr540 series fig. 7 typical forward characteristics fig. 8 typical forward characteristics fig. 9 typical forward characteristics fig. 10 typical junction capacitance fig. 11 operating tem perature derating curve
page . 4 september 30,2016-rev.04 mbr540 series part no_packing code_version mbr540_ay_00001 mbr540_ay_10001 mbr540_b0_00001 mbr540_b0_10001 mbr540_r2_00001 mbr540_r2_10001 for example : rb500v-40 _ r2 _ 00001 part no. serial number version code means hf packing size code means 13" packing type means t/r packing code xx version code xxxxx packing type 1 st code packing size code 2 nd code hf or rohs 1 st code 2 nd ~5 th code tape and ammunition box (t/b) a n/a 0 hf 0 serial number tape and reel (t/r) r 7" 1 rohs 1 serial number bulk packing (b/p) b 13" 2 tube packing (t/p) t 26mm x tape and reel (right oriented) (trr) s 52mm y tape and reel (left oriented) (trl) l panasert t/b cathode up (pbcu) u forming f panasert t/b cathode down (pbcd) d
page . 5 september 30,2016-rev.04 mbr540 series disclaimer ? reproducing and modifying information of the document is prohibited without permission from panjit international inc.. ? panjit international inc. reserves the rights to make changes of the content herein the document anytime without notification. please refer to our website for the latest document. panjit international inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ? panjit international inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ? applications shown on the herein document are examples of standard use and operation. customers are responsible in comprehending the suitable use in particular applications. panjit international inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ? the products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify panjit international inc. for any damages resulting from such improper use or sale. ? ? since panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.
|
